User guide

2-23

Step 4 Install the Camera

Initial Setting and Installation of Camera

5. Loosely tighten the screws.

6. Secure the safety wire.

Securely attach the safety wire to an anchor or structure.

After securing the ceiling end, secure the camera end of the safety wire using a screw

supplied with the camera.

7. Connect to the camera the LAN cable guided through the wiring hole.

If an AC adapter (optional) or external power supply is used, connect the power connector to the

camera.

If necessary, connect cables to the external device input/output terminals and audio input/output

terminals ( P. 3-5).