User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
2-41
Motion Detection Setting Tool
VBAdmin Tools
4. Check the motion detection status of the camera.
To check the level of motion detection operation based on the specified settings, select the
[Display motion detection status of the camera] check box. The motion detection status will be
shown by the icons specified below.
If the [Display motion detection status of the camera] check box is selected, the settings
cannot be saved. To save the settings, clear this check box.
5. Click [Save motion detection settings] to save the settings.
Note
z If a proxy server is used, the video frame rate may drop depending on the proxy load.
Accordingly, it is recommended that you don't connect the camera via a proxy while this
function is set.
z It is recommended that the motion detection level be set in a condition as close as possible
to the condition in which the camera is actually used.
Tip
z The status of the detection in peak block view and [Display motion detection status of the
camera] in this tool may not match the actual motion detection status of the camera.
z When the motion detection function of the camera is enabled, the video frame rate may
drop compared to when the function is disabled.
z Clicking [Edit] in the menu bar and selecting [Copy sensitivity settings] copies the settings
of [Sensitivity], [Size] and [Duration] for the currently selected area (1 to 4). If a different
area (1 to 4) is subsequently selected and [Paste sensitivity settings] is selected from [Edit]
in the menu bar, the copied settings will be pasted to the selected area.
(Detection disabled)
[Detected]
[Not detected]