User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
4-7
Distributing Video Using VB Viewer
Creating Web Pages for Video Distribution
Example of How to Create a Web Page Using VB Viewer
Sample Web pages created using VB Viewer are explained.
Use these samples as the base to create your original Web page.
z If the Web page data grows too big, it may no longer be possible to change the camera
settings.
When saving Web page data to the flash memory in the camera, make sure the total data
size does not exceed 3 Mbytes.
If Web page data is saved to the flash memory in the camera, be sure to check the event
logs after changing any settings to confirm that an error was not generated while saving the
new settings (S306, S307). If an error is recorded, delete the Web page data and set the
data again.
For details on the applicable errors, see P. 5-16.