User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
5-8
List of Log Messages
A101 Invalid user name [notice]
A102 Invalid password [notice]
A111 Invalid host [notice]
A160 Recovery of pan/tilt subsystem [notice]
A201 Registered panorama image error [warning]
A250 Control error during camera initialization [warning]
A260 Slipped pan/tilt position [warning]
Description user <User name> not found (A101)
Meaning The camera was accessed by an unauthorized user.
Description user <User name> password mismatch (A102)
Meaning The password is invalid.
Description host <IP address> access denied (A111)
Meaning The camera was accessed from a host from which access is prohibited.
Description <pan | tilt> recovered (A160)
Meaning The pan/tilt sub-system that had stopped functioning has recovered.
Remarks See A460.
Description corrupt panorama image - ignored (A201)
Meaning The panorama image is invalid.
Countermeasure
Recapture a panorama image and register it again.
Remarks A file may have been registered while still open.
Description Camera control timeout - < Camera command> (A250)
Meaning
An initialization error occurred due to a command timeout (upright
position/on ceiling, initialization of camera platform, dome).
Countermeasure
If the problem persists after rebooting the camera, the camera is faulty.
Description <Pan/tilt slipped> - c=< Error code> (A260)
Meaning The pan/tilt position has slipped.