User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
![](/manual/canon/vb-c60/user-manual-english/images/img-173.png)
5-9
List of Log Messages
Appendix
A330 Video input error [err]
A350 Camera control system [err]
A450 Camera initialization failed [crit]
A460 Stopping of pan/tilt subsystem function [crit]
Application (uploader) messages
A004 Starting and stopping of uploader [info]
Description video input timeout - resetting (A330)
Meaning The video input has been reset because video input stopped.
Countermeasure
If the error occurs repeatedly, the camera is damaged. Contact our
Customer Service Center.
Description camera status timeout - resetting (A350)
Meaning
The camera control system has been reset due to a communication
timeout with the camera.
Countermeasure
If the error occurs repeatedly, the camera is damaged. Contact our
Customer Service Center.
Description camera initialization failed - <Error code> (A450)
Meaning
The camera control function has stopped because the camera control
system could not be initialized.
Countermeasure
If the error persists after rebooting the camera, the camera is damaged.
Contact our Customer Service Center.
Description <Pan/tilt> stopped - c=< Error code> (A460)
Meaning
An error occurred during pan/tilt control, so the control function was
disabled.
Countermeasure
If the error persists after rebooting the camera, the camera is damaged.
Contact our Customer Service Center.
Remarks
To reset the error, send http://[IP address]/-wvhttp-01-/platformreset (if the
camera is not damaged.)
Description %1 uploader (A004)
%1 Starting or stopping.
Meaning The uploader was started or stopped.