User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
1-15
Setting the Camera Control and External Device Name (Camera)
1
1
Detailed Settings
Initial Camera Settings
(1) [AE Mode], [Slow Shutter], [Shutter Speed]
Set the camera exposure control and shutter speed.
[AE Mode]
[Auto]
The exposure is controlled automatically.
[Flickerless]
In this mode, image flickers caused by fluorescent lights, etc., can be reduced. The
shutter speed is automatically adjusted according to the brightness of the environment in
which the camera is used.
[Shutter-priority AE]
In this mode, a desired shutter speed can be specified.
[Slow Shutter]
Slow shutter can be set only when [Auto] is selected under [AE Mode].
Set the maximum slow shutter time to be used in the auto exposure mode when capturing
video in a dark place. Select [Disable], [1/15] or [1/8]. The longer the shutter time, the more
likely a residual image generates when a moving subject is captured. Accordingly, select an
appropriate time according to the capture condition.
[Shutter Speed]
Shutter Speed can be set only when [Auto (Shutter-priority AE)] is selected under [AE
Mode]. Select a desired shutter speed of the camera from the 12 levels from [1/8] to [1/
8000]. When capturing a moving subject, selecting a higher shutter speed lets you
capture less blurry image.
(2) [Focus Mode]
Set the focus mode of the camera.
[Auto]
The subject is automatically brought into focus. Normally [Auto] should be selected.
[Fixed at infinity]
The focus can be fixed to near infinity.