User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
1-33
Setting the Image Server, Audio Server and HTTP Server (Server)
1
1
Detailed Settings
HTTP Server
(1) [HTTP Port]
Set the HTTP port number in a range of 80 and 1024 to 65535.
Normally "80" (factory setting) should be used.
(2) [Global Address for the Web Page]
If a fixed global address is assigned to the camera using the NAT function of the router ( P.
4-12), set the global address and port number here. If [IP Address] is selected, enter the
specified IP address in the [IP Address] field. If [Host Name] is selected, the host name
specified in [DNS] under [Network] will be used. Set the necessary items under [DNS] ( P.
1-10).
Note
z If the setting of [HTTP Port] is changed, the camera may no longer become accessible
from the active browser. Check beforehand the precautions explained in "Notes" in "Setting
the Items Requiring Rebooting (Reboot Item)" ( P. 1-49).
z If [IP Address] is selected under [Global Address for the Web Page], be sure to set both [IP
Address (global address for the web page)] and [Port Number (global address for the web
page)]. If [Host Name] is selected, also be sure to set [Host Name] under [DNS] on the
[Network] setting page.