User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
2-20
View Restriction Setting Tool
Tip
z Even when view restrictions are set, an area outside the view restriction may still appear
momentarily when the camera is controlled near the boundary of the view restriction.
z To cancel the view restrictions, clear the [Apply the view restriction] check box and then
click the [Apply] button, followed by the [Save view restriction settings] button.
z If the setting fields are cleared while the [Apply the view restriction] check box is selected,
the maximum view restriction will be set.
z The controllable range and range that can be captured are as follows.
Maximum left/right captured area
Tilt controllable area
maximum up/down capture area
Maximum wide-angle viewing angle
Pan controllable area