User Manual
Table Of Contents
- Introduction
- Contents
- How to Read This Document
- Top Page of the Camera
- Chapter 1 Detailed Settings
- Setting Menu
- Accessing the Setting Menu
- Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
- Setting the Date and Time (Date and Time)
- Setting the Camera Control and External Device Name (Camera)
- Setting the Image Size, Quality and Frame Rate (Video)
- Setting HTTP/FTP Upload and E-mail Notification (Upload)
- Setting the Image Server, Audio Server and HTTP Server (Server)
- Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
- Setting User Access Privileges (Access Control)
- IPsec Settings (IPsec)
- Setting the Items Requiring Rebooting (Reboot Item)
- Viewing Event Logs and Current Settings, and Performing Maintenance (Maintenance)
- Chapter 2 VBAdmin Tools
- Chapter 3 VB-C60 Viewer
- Chapter 4 Creating Web Pages for Video Distribution
- Chapter 5 Appendix
2-30
Preset Setting Tool
(7) [Speed (PT)]
Set the moving speed of the camera during panning/tilting between 1 and 3. Moving the slide
bar from the left to right increases the value and consequently raises the speed.
(8) [Speed (Z)]
Set the speed of the camera during zoom in a range of 1 to 2. Moving the slide bar from the
left to right increases the value and consequently raises the speed.
(9) [Pause (sec)]
Set the time at which the camera stops at the preset position between 0 and 120 seconds in
5-second units.
Note
If the following warning is displayed, consider changing the settings by referring to the table
below.
Example of Warning Screen
* The touring time on the screen changes depending on the settings.
Clicking Cancel returns the display to the setting screen.
Clicking OK saves the set data.
(If you are using Preset Setting Tool, click [Save] on the setting page.)