Operation Manual

List of Log Messages
173
Appendix
7
S410 Event service initialization error [crit]
S411 External input/output service initialization error
[crit]
S412 Timer service initialization error [crit]
S413 Timer service runtime error [crit]
 Camera Messages
C001 Starting and stopping of camera control module
[info]
C002 Camera application started [info]
C201 Day/Night Mode switching warning [warning]
C211 Camera control command overflow [warning]
 RTP-related Messages
R001 Startup of RTP distribution module [info]
R002 Stopping of RTP distribution module [info]
R003 RTSP PLAY request received [info]
Description event initialization error [%1] [%2] (S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
event service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description extio initialization error [%1] [%2] (S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
external input/output device service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer initialization error [%1] [%2] (S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer service
was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
Description starting cameraappl (C002)
Meaning The camera application started.
Description Can’t switch Day/Night mode, because
current mode is Auto. (C201)
Meaning Day/Night Mode could not be switched.
Countermeasure Set Day/Night Mode to manual.
Description command queue overflowed (C211)
Meaning The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure Allow a longer interval (200 ms) for sending
the camera control command.
Description starting media_plane (R001)
Meaning RTP distribution module started.
Description stopping media_plane (R002)
Meaning RTP distribution module stopped.
Description PLAY received: client_IP=%1, profile=%2,
num_of_sessions=%3 (V=%4, A=%5,
M=%6, BC=%7) (R003)
%1 Client IP address
%2 Profile name of requested PLAY
%3 Total number of client sessions
%4 Total distribution count of Video stream
%5 Total distribution count of Audio stream
%6 Total distribution count of Metadata stream
%7 Total distribution count of
AudioBackChannel
Meaning RTSP PLAY request was received.