Operation Manual

59
4
Setting Page
All Videos
[Video Size Set]
Select the set of video sizes used by the camera. All
options in the [Video] menu and the size set that can be
selected in [Video Size] are determined by the set
selected here.
JPEG
(1) [Video Quality]
Select a desired video quality from 1 to 5 (5 levels) for
videos transmitted at each video size in JPEG.
Greater values have higher quality.
(2) [Video Quality: Digital PTZ]
Select a desired video quality from 1 to 5 (5 levels) for
Digital PTZ.
Greater values have higher quality.
(3) [Video Size: video Transmission]
Select the size of the transmitted video. The video
sizes that can be selected depend on the [Video Size
Set] setting.
The default video size is selected if the video size is
not specified in each type of viewer.
(4) [Maximum Frame Rate: Video Transmission]
Limit the maximum transmission frame rate per
second to reduce the viewer load. The maximum is 30
frames/sec. Enter a value of between 0.1 and 30.0.
(5) [Video Size: Upload / Memory card]
Select the size of video when using the upload
function (p. 64) or when recording to a memory card
(p. 82). The video sizes that can be selected depend
on the [Video Size Set] setting. Use [Event] > [Video
Record Action] (p. 69) to specify the destination of a
video recording (upload or memory card recording).
[Video] Setting Video Size, Quality and Frame Rate
The following can be set here.
• All Videos
Specify the set of video sizes used by the camera.
• JPEG
Set the video quality, size, maximum frame rate
and upload size in JPEG.
• H.264
Set the bit rate, video size and capture frame rate
in H.264.
• On-screen display
Set time, character string, etc. displayed over
images.
[Video Size Set] System Aspect ratio
[1920x1080/960x540/480x270] 1080p 16:9
[1280x720/640x360/320x180] 720p 16:9
[1280x960/640x480/320x240] 4:3 4:3
[Video Size Set] System Aspect ratio
[1280x720/640x360/320x180] 720p 16:9
[1280x960/640x480/320x240] 4:3 4:3
Important
• Changing the [Video Size Set] setting will disconnect all
connections and then change all the video sizes.
Consequently, users connected to the camera must
reconnect.
• If the [Video Size Set] selection is changed and you click
[Apply and Reboot], review the following settings and check
the operation.
- Privacy mask settings
- View restriction settings
- Preset settings
- Intelligent function settings
- Camera Angle Setting Tool