Owner's Manual

Configure the Camera
65
Viewer Settings
4
 Change the Video Window Format
 Change the Video Window Resolution
[160x120], [320x240], [480x270], [640x480],
[960x540], [1280x960], [1920x1080] and [Default] are
available. Select [Default] to use the camera’s
resolution.
Note
• If you save the layout (p. 71), the [Video Receive Size] setting
is also saved.
• The size used for [Default] is determined the first time you
display a video from the camera. The size on the Viewer will
not change, even if you change the size setting on the camera.
 Display the video Full Screen
You can display the video full screen.
A white frame is displayed surrounding the selected
video window.
The video from the selected video window is
displayed full screen.
1
Click the video window menu button to display the
menu.
2
Click [Video Format] and select the video format
([JPEG] or [MPEG-4], or [H.264]) from the submenu.
Important
Live video and audio are not synchronized for [MPEG-4] and
[H.264].
1
Click the video window menu button to display the
menu.
2
Click [Video Receive Size] and select the resolution
from the submenu.
Important
• When you display more than one video window for the same
camera, changes to the resolution of one of these windows
are applied to all of the other windows.
• The three video receive sizes in each set, for example
[480x270 (320x180 / 320x240)], in the [Video Receive Size]
submenu are sizes that correspond to the category [1080p
category (720p category / 4:3 category)], respectively.
Which of the three sizes that is used is determined by the
size set in [Video Size Set] for the camera.
•
The video size is set to “480x270” when [480x270 (320x180 /
320x240)] is selected in [Video Receive Size]. To set to
“320x240,” select [320x240].
1
Click the video window menu button to display the
menu.
2
Click [Video Display Size] and select [Full Screen] from
the submenu.
3
A confirmation message is displayed. Click [Yes].
4
To exit full screen display, press the Esc key.