Operation Manual

149
Admin Viewer/VB Viewer
6
The operations and settings that can be performed only in the Admin Viewer are explained.
Transmitting Audio
In the Admin Viewer, you can transmit audio via an
external device connected to the camera.
Click this button to transmit audio.
Use the slider to set an appropriate volume on the Audio
Transmission panel that appears.
In the [Audio sending time limit], select [No Limit], [1
min(s)], [5 min(s)] or [10 min(s)].
Note
• To transmit audio, set [Server] > [Audio Server] > [Audio
Reception from Viewer] to [Enable] on the setting page (p. 67).
• Audio transmission will continue even if you close the Audio
Transmission panel.
• To use the audio function in environments that use a proxy
server, the camera IP address must be specified in [Internet
options] > [Connections] > [LAN settings] > [Proxy server] >
[Advanced] > [Exceptions] of Internet Explorer.
Using Control for Admin
When you have obtained control privileges, click the
[Control for Admin] button to display the Control for Admin
Panel and perform camera operation and video settings.
 Opening/Closing and Moving Control Items
Clicking the title of a control item will open or close it.
You can open the various control items even without
obtaining the camera control privileges, but all items other
than [Video Reception] are not available.
You can also reorder control items using the up/down
buttons.
 Performing Operations and Settings
Click the camera control buttons to set the pan, tilt and
zoom operations as well as the speed.
Performing Operations and Settings in the Admin Viewer
Icon Meaning
Transmitting audio
Not transmitting audio
⇔
⇔