Operation Manual

46
The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page
of the camera (p. 29).
For details on entering the user name and password, see p. 29.
Note
You can also access the Setting Page from the Camera
Management Tool. For details, please refer to the “Camera
Management Tool User Manual”.
Setting Menu
(1) [Admin Viewer]
Clicking this button opens Admin Viewer.
(2) [Back to top]
Clicking this button navigates to the top page.
(3) Setting Menu
Clicking this button navigates to each setting page.
Note
The following message is displayed to the right of the title of the
settings menu even when the administrator password of more
than eight characters is set.
“8 characters or more are recommended for the administrator
password.”
Items Common to All Setting Pages
 Applying New Settings
When a setting is changed on any setting page, [Apply]
shown on the top right and bottom right of the setting
page turns from grayed-out to blue.
Click [Apply] to make the new setting effective.
Click [Clear] to restore the previous setting.
 Setting Changes Requiring Rebooting
Items that require the camera to be rebooted in order to
change settings are flagged with an orange mark.
When any item accompanied by an orange mark is
changed, the [Apply] shown at the top right and bottom
right of each setting page changes to [Apply and reboot].
Click [Apply and reboot] to confirm the new setting. The
new setting will be reflected and the camera will be
rebooted.
Click [Clear] to restore the previous setting.
Accessing the Setting Menu
Important
To ensure security, exit the web browser after completing
settings on the Setting page and after using Admin Viewer/
Admin Tools.
(1)
(2)
(3)
Important
Setting changes will be lost if you navigate to another setting
page without clicking [Apply] or [Apply and reboot]. Be sure to
click [Apply] or [Apply and reboot] to make the new settings
effective.