Owner's Manual

166
S303 Error on saving settings [err]
S307 Error on saving settings [err]
S310 Working error in event service [err]
S311 Working error in external input/output service
[err]
S312 Working error in timer service [err]
S320 PAN/TILT operation error [err]
S410 Event service initialization error [crit]
S411 External input/output service initialization error
[crit]
S412 Timer service initialization error [crit]
S413 Timer service runtime error [crit]
Description Can’t update files of system settings (S303)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
Description (vbadmin.c XXX) Can't update system
settings (S307)
Meaning An error generated while the settings were
saved by the setup protocol. Setting could
not be saved.
Countermeasure Provide enough memory space by deleting
unnecessary files in the user memory area, etc.
Description cannot work event [%1] [%2] [%3] (S310)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the event service
was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work extio [%1] [%2] [%3] (S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external input/
output device service was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work timer [%1] [%2] [%3] (S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 error occurred. [%2] (S320)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure Check that the camera is not touching the
dome, etc.
If the error is not caused by problems such
as contact with peripheral items, the camera
needs to be serviced.
Description event initialization error [%1] [%2] (S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
event service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description extio initialization error [%1] [%2] (S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
external input/output device service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer initialization error [%1] [%2] (S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer service
was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.