User manual

108
Drag the center of the frame to move the frame and change the camera angle.
If you draw a rectangle anywhere on the panorama image, the frame is redrawn at that location and the camera
angle and zoom change correspondingly.
The frame is blue when you do not have control of the camera.
[Panorama] is unavailable.
Note
You must first register a panorama image on the camera before using this feature. For details, please refer to the camera manual.
Play Back Audio
If the audio feature on the camera is used, you can play audio or send audio using a microphone. Select [Window] > [Audio
Panel] to open the audio panel.
(1) [Listen to Audio]
Starts audio playback.
(2) [Use Microphone]
Starts audio transmission.
(3) Show options button
Displays the options for the [Audio] panel.
(4) [Play audio also while using microphone]
Select if you want to play audio even when using a microphone.
(5) [Use silence detection to reduce network traffic]
Select if you want to detect silent segments when sending audio. Decreases the amount of data transmitted during
silent segments to decrease the load on network bandwidth.
(6) [Settings]
Displays the [Silence Detection Settings] dialog box.
(7) Hide options button
Hides the options of the [Audio] panel.
 Silence Detection Settings
Select the [Use silence detection to reduce network traffic] check box on the [Audio] panel to set the silence
detection sensitivity.
Click [Settings] to display the [Silence Detection Settings] dialog box and adjust the silence detection sensitivity.
S80xMkII
S90xMkII
S80x
S90x
H630
H610
M 720
H710
M620
M600
M 720
M700
C500
C50F S800VE S910F
Important
• You cannot send and receive audio from multiple Viewers simultaneously.
• The sending and receiving of audio is set to 10 minutes by default. The set time can be modified in [Viewer Settings]. For details,
please refer to “Configure the Viewer Display and Operation Settings” (P. 122).
(1)
(2)
(3)
(4)
(5)
(6)
(7)