User manual

154
 Warning and Error Messages in the Viewer
Event
notification
Invalid E-mail Address.
Characters other than alphanumeric characters and the underscore
(_) were entered for the e-mail address.
Message Cause
Viewer window
The time on this machine is out-
of-sync with the time used by the
storage server group. This
causes problems with the
display of events. To correct this
problem, please synchronize the
time of this machine to the server
group.
There is a time difference of 5 seconds or longer between the
Storage Server and the Viewer computer. Adjust the system time of
the Viewer computer to the time of the Storage Server.
This message is not displayed if the [Send notification when time is
out-of-sync with the storage server group] checkbox is cleared in the
[Viewer Settings] dialog box (P. 122).
Connection to storage server
<host name> could not be
established. Please verify that
the host name and port number
are correct.
A problem occurred when connecting to the Storage Server to
display a Viewer window.
Cannot save it in this folder.
The Windows folder or the Program Files folder was specified as the
destination folder for snapshots.
This layout cannot be saved
using the same name as an open
layout. Please try again using a
different name.
Tried to save a layout using the same name as another layout that is
open in another tab or window.
Saving the
Specified Video
The length of the extracted video
must not exceed 1 hour.
Tried to make the time longer than one hour.
Unable to extract video. There is
no video data in the specified
timeframe.
Could not save video because there was no recorded video in the
selected segment.
Cannot save it in this folder.
The Windows folder or the Program Files folder was specified as the
destination folder for a .mov file.
[Organize
Layouts and
Layout
Sequences]
dialog box
You cannot move the layout
<layout name> because it is
contained in the current layout
sequence.
Tried to move a layout that is registered to the layout sequence
currently in use.
You cannot move the layout
<layout name> because it is the
current layout.
Tried to move the current layout.
You cannot delete the layout
<layout name> because it is the
current layout.
Tried to delete the folder that contains the current layout or the
current layout and layout sequence.
Unable to change layout name.
The name <layout name>
already exists.
Tried to rename a layout using the same name as an existing layout.
You cannot move the layout
sequence <layout sequence
name> because it is the current
layout sequence.
Tried to move a layout that is registered to the layout sequence
currently in use.
You cannot delete layout <layout
name> because it is used by the
current layout sequence.
Tried to delete a layout that is part of the current layout sequence.
Message Cause