User manual

160
Events Indicating Errors or Warning Levels and Corresponding Actions
You can check events to determine if errors related to the Storage Server status have occurred.
When an event indicating an error or a warning level occurs, it is immediately displayed in the event panel or timeline. Take
the appropriate action for the event.
*1 Please refer to “Manage Disk Space” (P. 67).
8 12005
The URL is incorrect. Normally, this does not occur, however, it may occur when an attempt is
made to connect to an unsupported camera.
9 12006 http or https was not used.
10 – Camera not supported.
11 – General error.
12
407 Invalid request.
501 The specified session does not exist.
503
Occurs when the camera is temporarily unable to process requests due to server overload
(excessive requests from multiple clients), or an uncompleted start-up process on the camera, or
other reasons.
508 Request rejected due to temporary connection limits to camera.
13 – Not connected to camera.
Event Type Message Description Corresponding Action
Low disk space
notification*
1
Warning: Low disk space
Occurs when the free disk space
becomes less than the specified value, or
the disk usage becomes greater than the
specified value. Data may be deleted
before the specified number of storage
days has elapsed.
Check the recording
mode settings (P. 78).
Starts/stops file
deletion due to low
disk space *
1
Warning: Files deleted due to
low disk space
Occurs when the free disk space
becomes less than the threshold, or the
disk usage becomes greater than the
threshold.
Pauses/resumes
recording due to low
disk space *
1
Recording Suspended (Low
Disk Space <drive name>)
Occurs when the free disk space
becomes less than the limit level, or the
disk usage becomes greater than the
limit level.
Error connecting to the
camera
Error: Cannot Connect to
Camera
Occurs on an error when connecting to
the camera.
Check the network
status.
Error connecting to the
Storage Server
Error: Cannot Connect to the
Storage Server
Occurs on an error when connecting to
the Storage Server registered with the
Storage Server Group.
Error connecting to the
Storage Server Group
Error: Cannot Connect to the
Storage Server Group
Occurs on an error when connecting to
the Storage Server Group.
Change in the
recording frame rate
Recording Frame Rate
reduced due to high load
issues
Indicates that the recording frame rate
has been changed due to increased
server load.
Check the recording
mode settings (P. 78).
Error
Type
Error
Number
Meaning