User manual

Before Use

The process from preparation before introducing the system, to operation is shown below.

Step 1 Prepare for Introducing the System

Consider the video storage period and recording conditions, determine the hard disk capacity required for recording and

prepare the equipment.

Please refer to “Chapter 1 Before Use” for system design.

Step 2 Install the Camera

Set up your cameras for live video display or recording.

Please refer to your camera manuals.

Step 3 Installation

Install this software product on your computer.

Please refer to “Chapter 2 Installation”.

Step 4 Set Up the Storage Server

Add cameras to the Storage Server, configure disk space management settings for operation, and add users.

Please refer to “Chapter 3 Storage Server Setup” and “Chapter 4 System Management With RM Manager”.

Step 5 Check Video in the Viewer

Connect the Viewer to the Storage Server Group and check video.

Please refer to “Chapter 6 Monitor Video with the Viewer”.

Step 6 Configure the Viewer

Customize the Viewer. You can save a layout to monitor video in a customized Viewer for subsequent sessions.

Please refer to “Chapter 7 Viewer Settings”.

Step 7 Set a Recording Schedule

Configure automatic recording settings such as recording conditions and schedules.

Please refer to “Chapter 5 Setting a Recording Schedule”.

Setup Flow