User manual

When an external camera is connected and [Use External Video Input] is enabled, the settings on this dialog box are

unavailable.

Note

• Clicking the [Settings] button alone does not perform a preset tour. You must first configure the settings in the [Preset Tour

Settings] dialog box.

• You are not able to specify camera angle settings when configuring the intelligent function, configuring motion detection settings

with [Detect Motion Using] > [Camera], or when configuring multiple cameras. You are not able to specify [Preset Tour] settings

when configuring motion detection settings with [Detect Motion Using] > [Storage Server].

• To be able to select [Presets] or [Preset Tour], you must first register camera angle presets on the camera. For details, please

refer to the camera manual. When digital PTZ positions are registered in the camera's presets, set the video format to [Digital PTZ

(JPEG)] in the [Edit Schedule Item] dialog box (P. 75).

• Changing the preset name on the camera after making [Presets] or [Preset Tour] settings will disable those settings. If you want

to change the preset name, be sure to repeat the [Presets] or [Preset Tour] settings after you change the preset name.

Configure a Preset Tour

Select [Preset Tour] in [Camera Position] settings and specify the order of the presets that are registered in the

camera.

Click [Settings] to display the [Preset Tour Settings] dialog box.

Click [Add] to open the [Edit Preset Tour] dialog box.

Select a preset from the [Preset] list.

Configure the speed and pause settings using the sliders ([Speed (PT)], [Speed (Z)], and [Pause (sec)]).

Click [OK].

C50F

C50i