Operation Manual

Appendix
6
213
 Audio server error
B301 Audio device error [err]
B402 Audio server initialization failed [err]
B403 Settings change failed [err]
 Video error
V300 Video input error [err]
V320 Internal error in intelligent service [err]
V321 Pseudo mode setting error in intelligent
service [err]
V400 Video input initialization error [crit]
V401 Video input command error [crit]
Description cannot use audio device for
%1[%2:%3] (B301)
%1 Send/Receive type (rx | tx)
%2 Error type (open | write | flush)
%3 Error number
Meaning Detected an error in the audio device
Countermeasure If the problem persists, please arrange
for servicing.
Description wvaudio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be
initialized. The audio server stops.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated.
The audio server stops.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description video %1 warning - %2 (V300)
%1 Video number
%2 Error number
Meaning An error in the video input was
detected that may adversely affect the
operation of the camera.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description cannot work intelligent [%1][%2][%3].
(V320)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in intelligent
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description pseudo mode setting fail. (V321)
Meaning An error occurred in the pseudo mode
setting of intelligent service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description video %1 initialization failure - %2(%3)
(V400)
%1 Video number
%2 Process description
%3 Error details
Meaning The video input function was stopped
because the video input system could
not be initialized.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description video %1 command error - %2(%3)
(V401)
%1 Video number
%2 Process description
%3 Error details
Meaning The video input function was stopped
because a video input command could
not be processed.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.