Operation Manual

82
Security
Memory Card (P. 196)
Maintenance
User Management (P. 87)
The settings of this item are the same as those of the [User
Management] in [Basic] menu. Settings configured on one
page are also reflected on the other.
Host Access Restrictions (P. 185)
Separate access control from IPv4 and IPv6 addresses
can be set.
SSL/TLS (P. 187)
Certificate creation and management, and encrypted
communication settings.
802.1X (P. 190)
Settings for 802.1X authentication and authentication
status display, and for certificate management.
•IPsec (P.192)
Settings for using IPsec.
Settings for recording video to a memory card when an event
is triggered.
The settings of this item are the same as those in [Video
Record] > [Memory Card]. Settings configured on one page
are also reflected on the other.
General (P. 199)
Check the device information/settings, and licenses, and
reboot and initialize the device, etc.
Backup / Restore (P. 201)
Perform backup and restoration.
Update Firmware (P. 202)
Perform firmware updates.
Log (P. 203)
Display logs and configure log notification.
User Page
Link to web page customized by the user.
For information on the User Page, contact a Canon Customer Service Center.
Event
External Device (P. 149)
Operation settings for external device output and for
external device input triggered events.
Audio Detection (P. 152)
Detected changes in audio input from the microphone
connected to the camera can trigger operations such as
video recording or e-mail notification.
•Timer (P.155)
The timer function can generate events that can trigger
operations, such as video recording and e-mail
notifications, at regular intervals.
Intelligent Function (P. 157)
Configure the intelligent functions such as moving object
detection, camera tampering detection, and intrusion
detection.
Switch Day/Night (P. 180)
The camera angle can be moved to preset positions when
Day Mode and Night Mode are switched.
Linked Event (P. 181)
By linking two types of events, a single event is triggered.