Network Video Recording Software RM Series Administrator’s Manual

Configure the Camera
63
Viewer Settings
4
 Change the Video Window Format
• [MPEG-4] is unavailable.
• The live video and its audio are not in sync when
[H.264] is selected.
• [H.264] is unavailable.
• The live video and its audio are not in sync when
[MPEG-4] is selected.
[MPEG-4] and [H.264] are unavailable.
 Change the Video Window Resolution
[160x120], [320x240], [480x270], [640x480],
[960x540], [1280x960], [1920x1080] and [Default] are
available. Select [Default] to use the camera’s
resolution.
Only [480×270 (320×180 / 320×240)], [960×540
(640×360 / 640×480)], and [1920×1080 (1280×720 /
1280×960)] can be selected for [Resolution]. If a
resolution for a 720p or 4:3 category video is set on the
camera, the Live View video will be displayed at the
resolution listed in parentheses.
• [160x120], [640x480], and [1280x960] are unavailable.
• The resolutions that appear on the screen in
parentheses will not be used.
[480x270], [960x540], and [1920x1080] are unavailable.
[480x270], [960x540], [1280x960], and [1920x1080] are
unavailable.
The resolution cannot be specified for [H.264] format.
The resolution cannot be specified for [MPEG-4] format.
Note
• If you save the layout (p. 69), the [Video Receive Size] setting
is also saved.
• The size used for [Default] is determined the first time you
display a video from the camera. The size on the Viewer will
not change, even if you change the size setting on the camera.
 Display the video Full Screen
You can display the video full screen.
A white frame is displayed surrounding the selected
video window.
The video from the selected video window is
displayed full screen.
1
Click the video window menu button to display the
menu.
2
Click [Video Format] and select the video format
([JPEG] or [MPEG-4], or [H.264]) from the submenu.
1
Click the video window menu button to display the
menu.
2
Click [Video Receive Size] and select the resolution
from the submenu.
Important
When you display more than one video window for the same
camera, changes to the resolution of one of these windows are
applied to all of the other windows.
1
Click the video window menu button to display the
menu.
2
Click [Video Display Size] and select [Full Screen] from
the submenu.
3
A confirmation message is displayed. Click [Yes].
4
To exit full screen display, press the Esc key.