Operation Manual

224
Cannot be controlled, because it is set to fixed at
infinity mode.
You tried to operate the focus when [Focus] was set to [Fixed at infinity].
Cannot be controlled, because it is set to manual
mode.
You tried to operate the Back Light Compensation button or exposure
compensation when [Exposure] was set to [Manual], or [Smart Shade
Control] was set to [Auto].
You do not have video reception permission. A user without video reception privileges tried to connect to the camera.
Audio reception is restricted. You clicked the audio reception button when [Video and Audio] > [Audio] >
[Audio Server] > [Audio Transmission from the Camera] was set to [Disable].
Audio transmission is restricted. You clicked the audio transmission button when [Video and Audio] > [Audio]
> [Audio Server] > [Audio Reception from Viewer] was set to [Disable].
You clicked the [Audio Distribution] button while receiving audio when
[Audio Communication Method] was set to [Half Duplex] in [Video and
Audio] > [Audio] > [General Audio].
Your web browser is not supported. You started the Camera Viewer with an unsupported web browser.
ActiveX is disabled. ActiveX is disabled in the web browser settings or system functions cannot
be accessed from ActiveX due to security settings.
When this message is displayed while ActiveX is enabled, select the [Use a
proxy server for your LAN] checkbox in [Network and Internet] > [Internet
options] > [Connections] tab > [LAN settings] > [Proxy server] in [Control
Panel], then specify the camera IP address in [Advanced] > [Exceptions].
Cannot be controlled, because the smart shade
control is set to auto.
The [BLC] button was operated when [Smart Shade Control] was set to
[Auto].
Message Explanation
HM4x
H730 S30
HM4x H730