VB-M700F Operation Guide

6-2

Admin Tools consists of applications for remotely making camera settings, checking operating conditions, and acquiring logs.

Admin Tools

This is the top page of Admin Tools. All tools can be

launched from this page.

Privacy Mask Setting Tool

A tool that lets you hide areas you don't want to be seen

by setting privacy masks. Up to eight areas can be

masked, allowing thorough protection of privacy.

Panorama Creation Tool

A panorama image creation tool that shows the entire

area that can be captured by this camera. Once a

panorama image is captured and registered, it is shown in

the panorama display panel of the viewer. As the

panorama image is also shown when view restrictions and

presets are set, you can see at a glance which part of the

entire area the set area is occupying.

View Restriction Setting Tool

The View Restriction Tool restricts the viewable capture

range in the VB Viewer. You can set the desired range

with the mouse by referring to the preview in panorama

mode.

Preset Setting Tool

A tool that lets you set presets and the home position

visually. You can make the desired settings with the

mouse by referring to the preview in panorama mode. You

can also set [Preset Tour] whereby the camera tours and

monitors multiple presets.

Intelligent Function Setting Tool

This tool is used to set intelligent functions that perform

uploads, notify the viewer, record a log, etc., if a change

has occurred in the captured image due to movement of a

subject. By setting the conditions, you can let the camera

detect events such as “moving object”, “abandoned

object”, “removed object”, “camera tampering”. You can

view the image on the camera while setting the position

and size of the detection area, detection conditions, etc.

Admin Tools Overview

(p. 6-4)

(p. 6-5)

(p. 6-9)

(p. 6-12)

(p. 6-16)

(p. 6-22)