Operation Manual

List of Log Messages
171
Appendix
7
M207 Memory card removed before unmounting
[warning]
M208 Video file limit [warning]
M301 memory card control module error [err]
 HTTP Server Messages
H143 User name specification error [notice]
H144 Password specification error [notice]
H201 Timeout disconnect [warning]
 System Messages
S001 System started [info]
S002 System settings changed [info]
S010 Event service started [info]
S011 Event service shut down [info]
S012 External device service started [info]
S013 External device service shut down [info]
S014 Timer service started [info]
S015 Timer service shut down [info]
Description Memory card was pulled before unmount.
(M207)
Meaning The memory card was removed while still
mounted.
Description Video file count of %1 reached upper limit.
(M208)
%1 Video type ([Upload], [Recording-Mode
Stream], [Manual], [Timer], [Event])
Meaning The upper limit for the number of video files
that can be saved for that video type has
been reached.
Logs will be output for [Timer] and [Event]
only when [Overwrite videos] is set to
[Disable].
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication.
Description (http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).
Description starting paramd (S001)
Meaning Parameter management module started.
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
Description starting event (S010)
Meaning The event service was started.
Description shutdown event (S011)
Meaning The event service was shut down.
Description starting extio (S012)
Meaning The external device input/output service
was started.
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
Description starting timer (S014)
Meaning The timer service was started.
Description shutdown timer (S015)
Meaning The timer service was shut down.