Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620VE/VB-M620D/VB-M720F Operation Guide

Performing Operations and Settings in the Admin Viewer
157
6
Admin Viewer/VB Viewer
Recording to an Memory Card Manually
Video displayed in the Admin Viewer can be manually
recorded to an memory card.
Note
• To record on an memory card, an memory card must be
inserted in the camera (p. 138) and [Save Logs and Videos]
must be selected in the setting page > [Memory Card] >
[Operation Settings].
• The format and size of the video recorded on an memory card
depends on the settings made on the Setting page.
Video format: [Memory Card] > [Video Format]
Video size: JPEG [Video] > [JPEG] > [Video Size: Upload /
Memory card]
H.264 [Video] > [H.264(1)] > [Video Size]
 Recording Videos Manually
The [Start/Stop Memory Card Recording] button
appearance changes as shown below depending on
recording status.
 Confirming Manually Recorded Video
Use the Recorded Video Utility (p. 126) to confirm video
manually recorded to an memory card.
Click the [Recorded Video Utility] button to start the
Recorded Video Utility from the Admin Viewer.
1
If you have not yet obtained the camera control
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.
2
Click the [Start/Stop Memory Card Recording] button.
Not recording
Recording
3
To stop video recording, click the [Start/Stop Memory
Card Recording] button again.
Important
• Recording to the memory card will be terminated when the
length of manually recorded video exceeds 300 seconds
from the time recording started.
• When recording manually, do not change the settings in the
[Setting Page]. Doing so may result in the termination of the
manual recording.