Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620VE/VB-M620D/VB-M720F Operation Guide

[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
51
Setting Page
4
SNMP v3 Server
(1) [User Name]
When [Enable] is selected in [SNMPv3], set the user
name for using SNMPv3.
(2) [Security Level]
Select [No authentication and no encryption],
[Authentication but no encryption] or [Authentication
and encryption] for the SNMPv3 security level.
(3) [Authentication Algorithm]
When [Authentication but no encryption] or
[Authentication and encryption] is selected for
[Security Level], select [MD5] or [SHA1] for the
authentication algorithm.
(4) [Authentication Password]
When [Authentication but no encryption] or
[Authentication and encryption] is selected for
[Security Level], set the authentication password.
(5) [Encryption Algorithm]
When [Authentication and encryption] is selected for
[Security Level], select [DES] or [AES] for the
encryption algorithm.
(6) [Encryption Password]
When [Authentication and encryption] is selected for
[Security Level], set the encryption password.
Note
• The information set in the camera is read-only from the SNMP
manager.
• Use the SNMP Manager that supports SNMP MIB2 (supporting
RFC1213).