VB-M720F Operation Guide

[SSL/TLS] Setting HTTP Communication Encryption

Setting Page

(6) [Display Server Certificate Details]

Click [Exec] to view the details of the server

certificate.

(7) [Display Self CA Certificate]

Used for the purpose of testing SSL communications,

but otherwise not normally used.

(8) [Backup]

Click [Exec] to perform a backup of the certificates

and private key. This operation can only be performed

when [HTTPS Connection Policy] is set to use [HTTPS]

or [HTTP and HTTPS], and SSL communications are in

use.

(9) [Restore]

Installs the certificates and private key from

backup. Click [Browse] to select the backup file,

then click [Exec]. This operation can only be

performed when [HTTPS Connection Policy] is set to

use [HTTPS] or [HTTP and HTTPS], and SSL

communications are in use. The restored certificate

will take effect after rebooting.

Encrypted Communications

(1) [HTTPS Connection Policy]

Select whether or not to use SSL communications with

HTTPS connections.

To not use SSL communications, select [HTTP].

To use SSL communications, select [HTTPS] or [HTTP

and HTTPS]. SSL connections will be possible after

rebooting.

When [HTTPS] is selected, even HTTP connections

will be redirected to HTTPS and SSL communications

will be used.

Note

• It may take a few minutes to generate an SSL key.

• Depending on the type of the certificate being installed on the

camera, a dialog box may appear indicating that the web

browser has accepted the certificate and a connection can be

made.

If the dialog box does not appear, register the CA certificate in

the web browser.

Important

• Even if SSL communications are set here to be used, they will

not be used if the certificate is not installed.

• Video transmission performance will drop, if SSL

communications are used. When [HTTPS] is selected,

communication with RM is not possible.