Operation Manual

Setting Page
4
109
[Scream Detection Event]
Select whether to use scream detection event.
[ON Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a
scream detection event (ON event) is triggered.
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when a scream detection event is
triggered.
It is necessary to set presets beforehand with [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] (P. 170).
[Video Record]
Select whether to record video depending on the scream detection event.
If you select [Enable] and a scream detection event is triggered, video will be transmitted to the recording destination
specified in [Video Record Action] (P. 96).
[E-mail Notification]
Select whether to send an e-mail notification depending on the scream detection event.
If you select [Enable] and a scream detection event is triggered, an e-mail notification will be sent.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 102) beforehand.
[External Device Output for ON Event]
Select whether external device output (1 or 2) is active or inactive when an ON event is triggered.
Important
When the user has camera control privileges, those camera control privileges are released if the camera is moved to a preset position
specified in the [Preset] when triggered by a scream detection event.
R11