Operation Manual

Admin Viewer/VB Viewer
5
159
Pan / Tilt / Zoom
Pan, tilt and zoom the camera, as well as configure the speed settings for those operations.
For details, please refer to “Use [Pan/Tilt/Zoom] in Control for Admin” (P. 148).
Preset / Initial Setting Registration
 Preset Setting
Register presets and the home position, configure the preset tour route and preset auto control settings.
For details, please refer to “Register Presets” (P. 170).
 Initial Setting Registration
When you click [Initial Setting Registration], each of the current settings for the items in Control for Admin, except the
following items, will be registered to [Camera] > [Initial Setting] in the Setting Page.
• [Video Reception]
• [External Device Output]
A confirmation message appears, when you click [Initial Setting Registration].
If [yes] is clicked, the present pan/tilt/zoom position, as well as the camera settings, are registered. If [No] is clicked,
only the present camera setting values are registered. If [cancel] is clicked, nothing is registered, and the message is
closed.
Smart Shade Control
If the background is bright and the subject is hard to see, this function brightens dark areas without affecting bright areas to
make the subject easier to see.
This is different than Backlight Compensation (P. 155). This function suppresses over-exposure of highlights while
compensating for under-exposure in dark areas of the video.
R11
R10
R11 M641 M741