Operation Manual

Admin Viewer/VB Viewer

179

You can have the camera automatically tour multiple registered presets to allow monitoring.

Note

Preset tour is not performed while the camera is being controlled, such as with the Admin Viewer or the Admin Tools.

Preset tour is not performed when control privileges are obtained by RM-Lite.

[Tour Route Settings] Tab

Since the number of tour routes you can register, the numbers of preset that can be toured per route and the tour conditions

vary depending on the camera model, screen configurations differ as follows.

Configure the Preset Tour Route

Important

• Since use of preset tour could lead to overuse of the camera, possibly resulting in camera malfunction, it should only be used when

necessary. The amount of camera move in unit time can be reduced by increasing the duration the camera pauses at each point along

the tour.

• Intelligent Function cannot be used while using preset tour.

R11

R10

R11 R10

(4)

(1) (2)

(3)

(5) (6)