Operation Manual

Camera Angle Setting Tool

You will connect to the camera.

 Connect to the Next Camera

After setting the camera angle, click [Next] to connect to the next camera.

You will be disconnected from the current camera and connected to the next camera appearing in the list.

Note

• The [Select Camera] dialog box will continue to display until you close the Camera Angle Setting Tool or click the X in the upper

right corner of the dialog box.

• The camera list will be discarded when the Camera Angle Setting Tool is closed. Load the camera specification file the next time

you launch the Camera Angle Setting Tool.

Disconnect from the Camera and Close the Software

Once you have completed setting the camera angle, follow the steps below to disconnect from the camera and close the

Camera Angle Setting Tool. Note that camera angle settings will be lost if you turn the camera on/off without performing

these steps.

Select a camera to connect to and click [Connect].

Next camera