Operation Manual
56
Using Pan/Tilt/Zoom
You can pan, tilt and zoom the camera to set the camera angle.
Note
• Camera operations using clicking and dragging, do not offer a high precision control of the camera.
• The administrator can operate the camera regardless of view restrictions. Authorized and guest users can only operate the camera
within the restricted view.
Clicking on the Video Display Area or Use the Sliders
Moving by Clicking on the Video Display Area
If you click in the video display area, the camera angle will change to center on the mouse pointer location. If the
camera angle does not center on the desired location with a single click, repeat the operation.
Note
• Click operations are not available in the video display area while using the Viewer PTZ or Digital PTZ.
• Click operations in the video display area become available after starting the Viewer PTZ or Digital PTZ.
Important
• Multiple users cannot obtain control privileges simultaneously.
• The Obtain/Release Camera Control Privileges button is displayed for authorized users and guest users if [Camera Control] is selected
in [Basic] > [User Management] > [User Authority] on the Setting Page.
• Administrators can take away camera control privileges from authorized users or guest users. Authorized users can also take away
camera control privileges from guest users.
A user with lower privileges cannot obtain camera control privileges while a user with higher privileges has camera control privileges.
Once finished, the administrator should always exit the Viewer or click the [Obtain/Release Camera Control Privileges] button to
release the control privileges.
Important
The camera is designed to last for a total of 50,000 round-trip pan/tilt operations.
For example, the camera will last for approximately six years if it performs 25 round-trip operations per day.
If the durability limit for pan/tilt operations is exceeded, the camera may not be able to perform focus and zoom operations correctly.
S30 S31
HM4x
S30 S31
HM4x
S30
S31
H730 S80x S90x