User manual

7
 Other
Operating Environment
Temperature: VB-R11VE/VB-R10VE:
Operating Temperature Range (including direct sun exposure)
AC: -50°C – +55°C (-58°F – +131°F)
PoE+: -35°C – +55°C (-31°F – +131°F)
DC, PoE: -10°C – +55°C (+14°F – +131°F)
Start-up Temperature Range (including direct sun exposure)
AC, PoE+: -30°C – +55°C (-22°F – +131°F)
DC, PoE: -10°C – +55°C (+14°F – +131°F)
VB-R11:
AC, DC, PoE: -10°C – +50°C (+14°F – +122°F)
VB-M641VE:
– Sunshade cover (sold separately) necessary when under direct sun exposure
When the heater unit (sold separately) is installed
Operating Temperature Range
AC: -40°C – +55°C (-40°F – +131°F)
DC, PoE: -10°C – +55°C (+14°F – +131°F)
Start-up Temperature Range
AC: -30°C – +55°C (-22°F – +131°F)
DC, PoE: -10°C – +55°C (+14°F – +131°F)
When the heater unit (sold separately) is not installed
AC, DC, PoE: -10°C – +55°C (+14°F – +131°F)
VB-M641V:
AC, DC, PoE: -10°C – +50°C (+14°F – +122°F)
VB-M640VE:
PoE: -10°C – +55°C (+14°F – +131°F)
– Sunshade cover (sold separately) necessary when under direct sun exposure
VB-M640V:
PoE: -10°C – +50°C (+14°F – +122°F)
Operating Temperature Range (including direct sun exposure)
AC, PoE+: -50°C – +55°C (-58°F – +131°F)
DC, PoE: -10°C – +55°C (+14°F – +131°F)
Start-up Temperature Range (including direct sun exposure):
AC, PoE+: -30°C – +55°C (-22°F – +131°F)
DC, PoE: -10°C – +55°C (+14°F – +131°F)
Operating Temperature Range (including direct sun exposure)
PoE: -10°C – +55°C (+14°F – +131°F)
Humidity: 5% – 85% (without condensation)
Storage Environment
Temperature:
Humidity:
-30°C – +60°C (-22°F – +140°F)
5% – 90% (without condensation)
Installation Method Ceiling mount
Surface mount (except for VB-R11)
VB-R11VE/VB-R10VE:
Canon will not guarantee proper operation if the cameras are installed on surfaces
where the angle is more than ±5° from horizontal, because this will put a heavy load
onto sliding mechanical parts and may affect durability.
VB-R11:
Canon will not guarantee proper operation if the cameras are installed on surfaces
where the angle is more than ±5° from horizontal or on walls, because this will put a
heavy load onto sliding mechanical parts and may affect durability.
R11 R10
M641
M640
M741
M740
R11 R10