Operation Manual

156
If you select [Enable] and a timer event is triggered, video will be transmitted to the recording destination specified in
[Video Record] > [Upload] > [Video Record Action] (P. 144).
[E-mail Notification]
When [24-Hour Continuous Settings] is set to [Disable], select whether to send an e-mail notification depending on the timer
event.
If [Enable] is selected, e-mail notification is performed when a timer event is triggered.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 148) beforehand.
[External Device Output]
When [24-Hour Continuous Settings] is set to [Disable], select the actions of the external device output at [Start Time] and
[End Time] of a timer.
[Repeat Interval] is not supported.
[Day/Night Mode Switching]
When [24-Hour Continuous Settings] is set to [Disable], select the Day/Night Mode switching behavior when a timer event is
triggered. This can only be set with [Timer 1].
Select [Switch to Day Mode] to switch to Day Mode at the start time, and Night Mode at the end time.
Select [Switch to Night Mode] to switch to Night Mode at the start time, and Day Mode at the end time.
[Repeat Interval] is not supported.
Important
• If you set [Start Time] and [End Time] and select a preset with [Start Time Preset], the Day/Night setting in [Camera] > [Preset] >
[Camera Settings] > [Day/Night] (P. 118) is given priority. Therefore, even if you set [Day/Night Mode Switching] to [Switch to Day
Mode] or [Switch to Night Mode], the [Day/Night Mode Switching] setting will be disabled if the opposite setting has been configured
in [Preset] > [Camera Settings].
• When [Day/Night] in [Camera] > [Initial Settings] is set to [Auto] (P. 105), [Day/Night Mode Switching] will not happen when a timer
event is triggered.
• When the [Day/Night Mode Switching] settings switch Day/Night Mode, camera control privileges are released, even if the user has
obtained those camera control privileges using the Camera Viewer or other camera control applications.
HM4x S30 S31