VB-M600VE Operation Guide

3-2

Use the Camera Angle Setting Tool to adjust the camera angle when installing the camera or to change the capture

orientation according to the situation.

You can set zoom, focus and exposure compensation*.

You can set pan, tilt, rotation, zoom, focus and exposure compensation.

* The exposure compensation (P. 7-12) set with the Camera Angle Setting Tool or Admin Viewer is reset when the camera is

rebooted. To set exposure compensation when the camera starts, set [Exposure Compensation] from [Camera] - [Initial

Camera Settings] in the Setting Menu (P. 5-9).

Launching the Camera Angle Setting Tool

Launch the Camera Angle Setting Tool by double clicking

on the [Camera Angle Setting Tool] icon located on the

desktop or by selecting [All Programs] > [WebView

Livescope] > [Camera Angle Setting Tool] from the [Start]

menu.

Connecting to the Camera

The Camera Angle Setting Tool is not connected when the

camera starts. Connect to the camera through the

following operations.

The [Connection settings] dialog box will appear.

[Host Name]

Enter the host name or IP address of the camera (P. 2-5).

Setting the Camera Angle

Important

• The Camera Angle Setting Tool is bundled for angle adjustment during camera installation only and is not intended for daily use.

Overuse may cause the camera to malfunction.

• After changing settings in the Camera Angle Setting Tool, check the settings in the Setting page and Admin Tools operate as intended.

• The Camera Angle Setting Tool cannot be used via a proxy server.

• Upload functions cannot be used while the Camera Angle Setting Tool is connected.

VB-M700F

VB-M600D VB-M600VE

Click [Connect] from the [File] menu.

Enter each item for the camera to connect to and click

[OK].