VB-M600VE Operation Guide

Setting the Camera Angle

3-3

Camera Angle Setting Tool

[Administrator User Name]

Enter the administrator user name for the camera

(P. 2-5).

[Administrator Password]

Enter the administrator password for the camera

(P. 2-5).

[Enable SSL Communications]

Select this checkbox to connect to the camera using

SSL communications. Normally SSL communications

are not used (factory default setting) (P. 5-28).

[Port]

Set the HTTP port number to 80, 443 or in the range of

1024 to 65535. Normally [80] (factory default setting)

is used (P. 5-18).

Note

When the Camera Angle Setting Tool connects to a camera, the

viewer and recording software connected to the camera are

disconnected.

A live camera image from the connected camera will

be displayed and the camera angle can be set.

Connecting with a Camera List

The following explains the operations for loading a

camera specification file into the Camera Angle Setting

Tool and using the camera list to connect to cameras. See

“Creating a Camera Specification File” (P. 3-8) for

information on how to create a camera specification file.

 Loading a Camera Specification File

The [Select Camera] dialog box will appear.

Click [Yes] at the following message.

Important

• Access to one camera is restricted to 30 minutes. The

Camera Angle Setting Tool will be disconnected

automatically after 30 minutes. Reconnect if you do not

complete camera angle settings within this time.

• One camera cannot be accessed by the Camera Angle

Setting Tool from multiple PCs at the same time.

Click [Select Camera] from the [File] menu.

Double-click [Load camera specification file].

Select the camera specification file and click [Open].