VB-M600VE Operation Guide

3-6

[Control Assist Display] selection box

Select whether to [Enable] or [Disable] operation assist

in the image display area.

[

Control

Button

Display

] selection box

Select whether to [Enable] or [Disable] the [Pan] button

and [Tilt] button in the image display area.

As [Image Flip] selection box

Select the orientation of the camera image.

If [Enable] is selected, the image will be rotated 180

degrees.

Ad [

Control

Assist Correction]

When the orientation of the camera is moved by hand,

the operation assist display will not correspond with the

actual camera angle. In this case, click [Control Assist

Correction] to confirm the actual camera angle and

automatically correct the display position of operation

assist.

Operation assist correction takes about 1 minute to

complete.

Af [Focus]

You can control the focus.

Ag [Exposure Compensation]

You can control the exposure.

Setting the Camera Angle

You can operate pan, tilt, rotation and zoom operations in

VB-M600D/VB-M600VE to set a desired camera angle.

VB-M700F allows zoom operation only.

 Set Using the Operation Buttons and Sliders

Click each of the [Pan], [Tilt], [Rotation] buttons to set the

camera angle. Camera angle changes in orientation if the

button is held down, and stops when the button is

released.

To set rotation using the [Rotation] slider, drag the slider

and release the mouse button when the subject in the

image is shown at a level angle.

VB-M600D VB-M600VE

Pan (horizontal movement) operation

Tilt (vertical movement) operation

Rotation (angled movement) operation