VB-M600VE Operation Guide

5-32

Tool

1 [View Logs]

Display a history of camera operations and

connections to each viewer, etc.

2 [View Current Settings]

Display a list of current settings.

3 [Reboot]

The camera is rebooted.

4 [Restore Settings]

Discard user-defined settings and restore all setting

items to factory default settings except camera

administrator password, network setting, date, time,

time zone, SSL certificate and encrypted

communications. Executing this operation will reboot

the camera automatically.

Note

• It is recommended that you write down all current setting

values before restoring factory default settings in [Restore

Settings] (P. 8-23).

• The camera can be restored to factory default settings using

the reset switch as well. Note, however, that this will reset all

camera settings to factory default settings except for date and

time (P. 8-22).

[Maintenance]

Viewing Event Logs and Current Settings and Performing Maintenance

The following items can be used here.

•Tool

Display or Initialize Camera Settings

Caution

You must not turn off the camera while it is

performing the [Restore Settings] operation. Turning

off the camera at this stage may result in making it

unable to boot correctly.