Network Video Recording Software RM-Lite Ver.1.0 Administrator's Manual

2-2
Before Installation
Use an NTFS Formatted Drive
The drive you install the software on and the drive for
saving recorded images must be NTFS format.
Set Up the Cameras
You must set up any cameras that you will use with this
software before starting operation. For details, refer to the
camera manual.
Stop Other Applications
Stop other applications that are running on the computer,
such as anti-virus software, before installing the software.
Install .NET Framework SP1
.NET Framework 3.5 SP1 or later must be installed on the
computer.
You can download it from the Microsoft Download Center,
or use the installer on the setup CD-ROM (Applications
folder > DotNetFramewrk folder > dotnetfx35.exe).
How to Install the Software
Note
When the [User Account Control] dialog box appears, click [Yes]
(or [Continue]).
Select [Complete] to install both applications. If you
selected this option, proceed to step 7.
Select [Custom] to separately install either the Storage
Server or the Viewer. If you selected this option,
proceed to step 6.
Installation
Important
You must log on to the computer as a computer administrator to
install this software.
1
Double-click RMLite_v10.exe in the [Applications]
folder on the setup CD-ROM bundled with the camera.
2
Click [Next].
3
Read the license agreement carefully. Click [I accept
the terms in the license agreement], if you accept
them, and then click [Next] to continue.
4
Enter your user name and organization, and click
[Next].
5
Specify whether to install both the Storage Server and
Viewer, and click [Next].