Operation Manual

180
(1) [Route List]
This is the preset tour route list. It displays the configured tour conditions. You can configure five tour routes.
(2) Tour Condition Settings
Configure the tour route name and conditions for touring (P. 181).
(3) Select Preset List
Registered presets in the [Preset Setting] tab appear in this list if [PTZ Position Settings] is [Yes].
Select the preset you want to add to the tour route from this list.
Note
If the position for the preset is outside the view restriction range, (warning icon) will appear on the left.
(4) [Tour Presets List]
Presets that will be toured appear in this list. They will be toured in order from the top of the list.
You can configure settings, such as changing the preset order and the time to pause at a preset position.
(5) [Restore settings]
This discards the settings you are configuring and reverts to the settings registered in the camera.
(6) [Save settings]
The settings in the [Tour Route Settings] tab are saved to the camera.
Important
[Restore settings] is shared with the [Auto Control Settings] tab. Since clicking this affects both tabs, also take care when restoring auto
control settings.
Important
[Save settings] is shared with the [Auto Control Settings] tab. Since clicking this affects both tabs, also take care when saving auto
control settings.
M641 M640
M741
M740
(4)
(3) (5) (6)
(2)
R11
R10