Operation Manual

208
 Load Position Information from Video Display Area Camera Angle to
Configure Settings
You can set the preview frame displayed on the panorama screen by loading position information from the actual
video appearing in the video display area.
You can also enter values directly.
Note
If you have selected [Apply the view restriction] and leave any of the setting values empty, the maximum view range will be set.
The imported view restriction is reflected in the value input box.
For more detailed settings, you can directly input values into value input boxes.
You can confirm the loaded setting values were updated in the panorama screen.
The settings are saved to the camera.
Note
• The controllable range and range that can be captured are as follows.
• The pan and tilt ranges vary depending on the zoom ratio (view angle).
1
Select [Apply the view restriction].
2
Use the viewer area to adjust the camera angle, set the upper, lower, left and right limits, and the telephoto and
wide-angle views, clicking [Get value] for each position set.
3
Click the [Display in panorama screen] button.
4
Click [Save settings].
Maximum vertical capture range
Controllable tilt range
Controllable pan range
Maximum horizontal capture range
Maximum wide-angle viewing angle