Operation Manual

216

In video detection, select the type to detect, and set the tracking area for video changes while checking images on the

camera. You should also set which operations (e-mail notification, record video, playing audio from the speaker connected

to the camera) should be carried out when changes are detected.

Steps for Configuring Video Detection

The following are the basic steps for configuring video detection. For details on settings for each type of detection, please

refer to “Configure Detection Criteria ([Detection Criteria] Tab)” (P. 219).

For details on how to adjust presets, please refer to “Register Presets” (P. 170).

Note

You can select presets that meet the following conditions.

Intelligent Function Setting Tool

- Video Detection -

R11

R10

M641

M640

M741

M740

Select [Lock camera position] in [Camera Position Settings], then select a preset.

R11

R10