Operation Manual

258
S413 Timer service runtime error [crit]
S420 External IO controller has failed [err]
S430 Failure of temperature sensor [crit]
 Audio server error
B301 Audio device error [err]
B402 Audio server initialization failed [err]
B403 Settings change failed [err]
 Video error
V300 Video input error [err]
V320 Internal error in intelligent service [err]
V321 Pseudo mode setting error in intelligent
service [err]
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer
service was running.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description external io controller is broken.(S420)
Meaning The external IO controller has failed.
Countermeasure The external IO controller firmware
must be updated. If the problem
persists after updating the firmware,
the camera is faulty. Arrange for
servicing.
Description Cannot get temperature (S430)
Meaning The temperature cannot be acquired
from the temperature sensor.
Countermeasure If the problem persists after rebooting,
the circuit board may have failed.
Arrange for servicing.
Description cannot use audio device for
%1[%2:%3] (B301)
%1 Send/Receive type (rx | tx)
%2 Error type (open | write | flush)
%3 Error number
Meaning Detected an error in the audio device
Countermeasure If the problem persists, please arrange
for servicing.
Description wvaudio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be
initialized. The audio server stops.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated.
The audio server stops.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description video %1 warning - %2 (V300)
%1 Video number
Meaning An error in the video input was
detected that may adversely affect the
operation of the camera.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description cannot work intelligent [%1][%2][%3].
(V320)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in intelligent
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description pseudo mode setting fail. (V321)
Meaning An error occurred in the pseudo mode
setting of intelligent service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.