Operation Manual

Setting Page
4
63
• Video Settings (P. 72)
• Upload (P. 96)
Settings for uploading video via HTTP or FTP when an
event is triggered.
• Memory Card (P. 101)
Settings for recording video to a memory card when an
event is triggered.
The settings of this item are the same as those of the
[Memory Card] menu. The settings can be made with
either of them.
• E-mail Notification (P. 102)
Settings for sending an e-mail notification to a specified
recipient when an event is triggered.
Video Record
Event
Security
Memory Card (P. 130)
Maintenance (P. 134)
• External Device (P. 104)
Operation settings for external device output and for
external device input triggered events.
• Audio Settings (P. 87)
The settings of this item are the same as those of [Video
and Audio] > [Audio Settings].
• Audio Detection (P. 107)
Detected changes in audio input from the microphone
connected to the camera can trigger operations such as
video recording or e-mail notification.
•Timer (P.110)
The timer function can generate events that can trigger
operations, such as video recording and e-mail
notifications, at regular intervals.
• Switch Day/Night (P. 112)
The camera angle can be moved to preset positions when
events cause Day Mode and Night Mode to switch.
• Linked Event (P. 113)
By linking two types of events, a single event is triggered.
R11
M641
M741
R11
M641
M741
R11
M641
M741
R11 M641
M741
• User Restrictions (P. 118)
Used for adding new authorized users that can access the
Admin Viewer, and for setting permissions for users.
• Host Restrictions (P. 119)
Separate access control from IPv4 and IPv6 addresses
can be set.
• SSL/TLS (P. 121)
Certificate creation, administrative settings and encrypted
communication settings.
• 802.1X (P. 124)
Settings for 802.1X authentication and authentication
status display, and for certificate administration.
•IPsec (P.126)
Settings for using IPsec.
Perform memory card operations or configure settings.
Check logs or settings, or perform camera maintenance.
User Page
Link to web page customized by the user.
For information on the User Page, contact a Canon Customer Service Center.