Operation Manual

76
[Smart Shade Control Strength (Auto)]
Select the control strength when [Smart Shade Control] (P. 80) is set to [Auto].
[Mild]: Select if noise is noticeable.
[Medium]: Recommended setting for Auto mode (default setting).
[Strong]: Select to increase visibility in dark areas.
[Haze Compensation Strength (Auto)]
Select the strength of compensation when [Haze Compensation] (P. 81) is set to [Auto].
Note
When [Haze Compensation] is set to [Auto] and [Haze Compensation Strength (Auto)] is set to [Strong], contrast may be strong if the
subject is not obscured by haze. If this happens, set [Haze Compensation Strength (Auto)] to [Mild].
[Infrared Strength (Auto)]
Select the infrared illumination strength when you have selected [Auto], [Auto (Flickerless)] or [Auto (Shutter-priority AE)] for
[Exposure] (P. 80).
Note
If all or part of the image appears to have a white glow, there is a possibility that a wall (even a wall not in the image) is reflecting the
infrared lighting. If this occurs, please adjust the camera angle.
When using the infrared lighting, and there is a problem in getting the desired contrast on the object (would like the image brighter or
darker), please adjust the Exposure Compensation (P. 80) and/or the Metering Mode (P. 80).
[Pan/Tilt Speed Control]
Select the pan/tilt control mode.
If [Control by zoom position] is selected, the pan/tilt speed will be slower in telephoto, and faster in wide-angle.
Note
Pan/Tilt Speed Control can also be set in [Control for Admin] > [Pan/Tilt Speed] (P. 148).
If [Control by zoom position] is selected, [Control for Admin] > [Pan/Tilt Speed] will also be fixed at [Control speed by zoom position].
[Auto Flip]
Select this to enable or disable Auto Flip.
If you enable Auto Flip and tilt the camera using the video display area in the Admin Viewer/VB Viewer (P. 147), the video
will flip when the tilt angle of the camera nears 100°.
For example, if tracking a subject that passes directly under a ceiling mounted camera (tilt angle 90°), the video will flip as
the tilt angle nears 100° without the subject appearing inverted.
Note
Auto Flip may be disabled depending on the View Restriction Setting Tool settings (P. 209).
Important
[AGC Limit] will not function if [Admin Control] > [Exposure] (P. 162) is set to [Manual] or [Auto (Flickerless)].
Minimum subject illumination may change when [AGC Limit] is set.
M741
R11 R10
R11
R10