Operation Manual

Settings for the camera name and external input/output devices, and for camera use and installation settings.

Camera Name

Set the camera name.

[Camera Name]

Enter any camera name. Be sure to enter a name in [Camera Name].

Camera Control

Set various controls for easier viewing of video.

[Digital Zoom]

Select this to enable or disable digital zoom.

If [Enable] is selected, the area indicating digital zoom will be displayed next to the zoom slider (P. 57).

Unlike optical zoom, the higher the digital zoom ratio, the lower the video quality.

Note

If [Enable] is selected, the area indicating digital zoom will be displayed next to the zoom slider in [Camera] > [Initial Settings] only.

[Enhanced Digital Zoom]

Select this to enable or disable the enhanced digital zoom.

When the video size is small, digital zoom can be used to enlarge it up to the maximum size resolution with reduced video

deterioration.

When [Enable] is selected, an area indicating the enhanced digital zoom and a horizontal line (blue) indicating the

enhanced digital zoom telephoto end are displayed on the zoom slider of the Viewer (P. 57).

[Camera] > [Camera]

Setting General Camera Controls

The following settings can be configured here.

• Camera Name

• Camera Control

• Day/Night (when Auto is set)

• Installation Conditions

• Camera Position Control

• External Input Device 1, 2

• External Output Device 1, 2

HM4x

H730

S30

H730

HM4x