Operation Manual

182
[Volume Detection]/[Scream Detection]
Select whether an ON event or OFF event triggers a linked event in [Volume Detection Status]/[Scream Detection
Status].
[External Device Input]
Select External Device Input in [External Device Input], and then select an active event or inactive event to trigger
a linked event in [External Device Input Status].
[Timer]
Select the timer event number to use in [Timer].
[Intelligent Function]
Select the Intelligent Function detection setting number (P. 162) to use in [Intelligent Function], then select whether
an ON event or OFF event triggers a linked event in [Intelligent Function Status].
Note
You cannot set the same event type for [Event 1] and [Event 2]. However, a combination of [Timer 1] to [Timer 4] can be set for
[Timer].
Also, a combination of [Input 1] and [Input 2] can be specified for [External Device Input].
 Operation
Set the operations to be performed when linked events are triggered.
[ON Event Operation]
If [Enable] is set, [Preset] ( ), [Video Record] and [E-mail Notification] will be executed according to
their settings when a linked event is triggered (ON event).
[OFF Event Operation]
If [Enable] is set, [Preset] ( ), [Video Record] and [E-mail Notification] will be executed according to
their settings when a linked event is completed (OFF event).
[Ongoing ON Event Operation]
Select the operations to be performed during an ON event.
If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the
linked event.
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when a linked event is
triggered.
It is necessary to set presets beforehand with [Camera] > [Preset] (P. 118).
Note
[Preset] cannot be configured when [Intelligent Function] is included in [Event Type].
[Video Record]
Select whether to record video depending on the linked event.
If you select [Enable] and a linked event is triggered, video will be transmitted to the recording destination specified
in [Video Record] > [Upload] > [Video Record Action] (P. 144).
[E-mail Notification]
Select whether to send an e-mail notification depending on the linked event.
If you select [Enable] and a linked event is triggered, an e-mail notification will be sent.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 148) beforehand.
[External Device Output for ON Event]
Select the states of external device output when an ON event is triggered.
[External Device Output for OFF Event]
Select the states of external device output when an OFF event is triggered.
[Audio Playback at ON Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event is triggered.
[Audio Playback at OFF Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event completes.
HM4x
H730
HM4x S30 S31
HM4x
S30
S31
HM4x S30 S31
HM4x S30 S31
HM4x
H730
HM4x
H730