Operation Manual

160
V420 Could not start intelligent service [crit]
V421 Intelligent service error [crit]
 Application (Memory Card) Messages
M001 Starting and stopping of memory card control
module [info]
M203 Not enough space on memory card [warning]
M204 Invalid file removed [warning]
M207 Memory card removed before unmounting
[warning]
M208 Video file limit [warning]
M301 Memory card control module error [err]
 Application (Camera) Messages
C001 Starting and stopping of camera control module
[info]
C002 Camera application started [info]
C201 Day/Night mode switching warning [warning]
C211 Camera control command overflow [warning]
Description intelligent initialization error [%1] [%2] .
(V420)
%1 Error number
%2 Cause of error
Meaning Failed to initialize intelligent service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description intelligent working error [%1] [%2] . (V421)
%1 Error number
%2 Cause of error
Meaning An error that does not permit recovery
occurred while intelligent service was
running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 sdctrl (M001)
%1 Starting or stopping
Meaning The memory card control module (sdctrl)
has started or stopped.
Description There is not available space (M203)
Meaning Insufficient memory card capacity.
Description Invalid file %1 was removed. (M204)
%1 Name of removed file
Meaning An invalid file was removed.
Description Memory card was pulled before unmount.
(M207)
Meaning The memory card was removed while still
mounted.
Description Video file count of %1 reached upper limit.
(M208)
%1 Video type ([Upload], [Recording-Mode
Stream], [Manual], [Timer], [Event])
Meaning The upper limit for the number of video files
that can be saved for that video type has
been reached.
Logs will be output for [Timer] and [Event]
only when [Overwrite videos] is set to
[Disable].
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
Description starting cameraappl (C002)
Meaning The camera application started.
Description Can’t switch Day/Night mode, because
current mode is Auto. (C201)
Meaning Could not switch day/night mode.
Countermeasure Set Day/Night mode manually.
Description command queue overflowed (C211)
Meaning The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure Allow a longer interval (200 ms) for sending
the camera control command.